Description
Chisel For Cutting Rivets, Bolts, and Nuts | Pin Punch For Final Removal To Drive Out Pins and Rivets | Center Punch For Marking Center Lines and Pilot Drill Locations | Long Taper Punch To Install and Remove Pins and Shafts and To Align Holes | Starter Punch For Both Starting and Installing Pins and RivetsGearWrench introduced the original patented five-degree ratcheting wrench in 1996 and quickly became a go-to brand for professional automotive technicians. The innovation didn’t stop there. Year after year, the GearWrench brand continues to expand its line-in ratcheting tools and beyond-to help automotive and industrial technicians get their jobs done faster and easier. Includes: 1/4″ x 4-3/4″ x 1/4″ Cold Chisel, 3/8″ x 5″ x 5/16″ Cold Chisel, 7/16″ x 5-1/2″ x 3/8″ Cold Chisel, 1/2″ x 6″ x 3/8″ Cold Chisel, 5/8″ x 6-1/2″ x 3/8″ Cold Chisel, 3/4″ x 7″ x 5/8″ Cold Chisel, 7/8″ x 7-1/2″ x 3/4″ Cold Chisel, 1″ x 8″ x 7/8″ Cold Chisel, 1/4″ x 4-1/4″ Center Punch, 3/8″ x 5″ Center Punch, 7/16″ x 5-1/2″ Center Punch, 3/32″ x 4-3/4″ x 5/16″ Pin Punch, 1/8″ x 5″ x 5/16″ Pin Punch, 5/32″ x 5-1/4″ x 5/16″ Pin Punch, 3/16″ x 5-1/2″ x 5/16″ Pin Punch, 1/4″ x 7″ x 3/8″ Pin Punch, 5/16″ x 7″ x 1/2″ Pin Punch, 1/8″ x 8″ x 3/8″ Long Taper Punch, 5/32″ x 8-1/2″ x 1/2″ Long Taper, 3/16″ x 9″ x 1/2″ Long Taper Punch, 1/4″ x 11″ x 5/8″ Long Taper Punch, 5/32″ x 5″ x 3/8″ Starter Punch, 3/16″ x 5″ x 3/8″ Starter Punch, 1/4″ x 6″ x 1/2″ Starter Punch, 1/8″ x 4-1/2″ x 5/16″ Starter, 5/16″ x 7″ x 5/8″ Starter Punch & 3/8″ x 8″ x 3/4″ Starter Punch.
