Description
Titan Flow Control CV 12-CS Carbon Steel Short Pattern Wafer Type Swing Check Valve w/ Nitrile Rubber Seat & Seal – ASME Class 150 Description
Check valves are automatic shut-off valves that are commonly used for preventing backflow or drainage in a piping system. Often applied on the discharge side of pumps, check valves prevent the system from draining if the pump stops and protects against backflow, which could harm the pump and/or other equipment.
Note: This valve is intended for liquid service that is steady, clean (no abrasives or solids), and non-pulsating. Flow-rate must not exceed 15 ft/sec.
